A guillotine or Shearing machine is a device used to cut sheet metal, the cutting force of which is sometimes by the force of the foot, the force of the hand with less force, or mechanically or hydraulically with high force
As the name of the product indicates, like the scissors, this machine consists of two blades, one of which is mounted on the upper jaw and the other on the machine, and the cutting process is performed due to the pressure of the blades.
It should be noted that the blades start from one side at the time of cutting and move slowly to the other side and the cutting process is completed, in the meantime, the worker in the sheet metal machine is held completely to complete the cutting process.
Important points in this regard are the high speed of the mechanical gears of the gearbox and the slightly lower speed, but the quality and cutting thickness of the hydraulic device.
shearin machine or mechanical shearing machine are a type of cutting machine made through the gearbox motor and have a higher speed, but it is possible to cut metal sheets with a thickness of one to six millimeters in length of one to three meters. The important point in this feature is that the cutting quality in mechanical models is slightly lower than the hydraulic ratio.
As its name suggests, this model uses an oil pressure system to supply the required cutting force
Higher thickness in cutting and the possibility of making guillotines up to 8 meters are among the features of the hydraulic system, which are generally divided into the following categories:
4.5 متر 16 میل
3 متر 6 میل
2 متر 30 میل
2 متر 30 میل
2 متر 8 میل
2 متر 6 میل
3 متر 6 میل
3 متر 12 میل
3 متر 8 میل
3 متر 12 میل
3 متر 12 میل
6 متر 30 میل
7.7 متر 25 میل
7 متر 25 میل
